+  Central Florida Fieros Forum
|-+  Fiero Discussion» Technical» 1988 speedo wiring issue
Pages: [1]
Author Topic: 1988 speedo wiring issue  (Read 2008 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 1

Topic starter

« on: September 29, 2013, 06:29:13 PM »

I have a 1988 Pontiac Fiero GT 2.8L 5spd, I am not getting any continuity into the car from the VSS sensor, I am checking it on the yellow and purple wire, are these the correct wires? Also, the wires from the VSS sensor come out, go through a plug connection and go back into the trans housing, can anyone tell me where they come back into the harness at? I would like to check there before I start pulling heat tape off and start chasing the harness. Any help would be greatly appreciated!! Thanks
Global Moderator
Official CFF Post Whore
Offline Offline

Gender: Male
Posts: 1787

1988 Formula SII-SC 3800 M17 - The Maroon Menace

« Reply #1 on: September 30, 2013, 06:38:38 PM »

Hi Chris
Welcome To CFF

You can get wiring diagrams from the great guys at Fiero news in their download section


« Last Edit: October 01, 2013, 01:44:51 PM by Pappy » Logged

Pappy - Crusty old retired MSgt
To Err is Human, to Forgive is not SAC Policy
Pages: [1]
Jump to:  

Go to CFF Club & Vendor links.